4SD Submersible Bore Well Pump For Farmland Irrigation
Product Description
4SD is a diving system deep well pump, oil immersed motor, using food grade mechanical oil, energy saving and environmental pollution water source. Wide voltage design for low voltage start, 160 V low voltage start and 180-230 volts.
The whole machine adopts thickened 304 stainless steel, more durable, the body adopts a split design, wear resistance, corrosion resistance and high temperature resistance, long service life. Nanometer carbon multi-stage floating impeller, good wear resistance and sand resistance performance.Stainless steel bearings, hard, running smoothly. High precision rotor, made of high performance cold rolled silicon steel belt, surface through moisture and rust treatment, stable operation. Inlet encryption stainless steel filter net, effective filtering magazine.
Pressure regulating structure to ensure the maximum diving depth of 80 meters.
The electric pump can operate continuously under the following conditions.
1.The medium temperature is less than 40 ° C.
2.The PH value of the media is between 6.5-8.5.
3.The volume ratio of solid magazines in the medium is less than 0.1%.The viscosity is not greater than 0.2 mm.
4.The power supply frequency of 50HZ, voltage is single phase current 220V, three phase AC 380V, voltage fluctuation range is up or down 10% of the rated value.
5.The depth of immersion does not exceed 80 meters.
Application
Water supply
Sprinkler irrigation
Pressure boosting
Fire-fighting
Specifications
Rewindable motor or fully enclosed shielding motor
Single-phase: 220V-240V/50Hz
Three-phase: 380V-415V/50Hz
Dimension complied with NEMA standard
Curve tolerance accord with ISO9906
Options on Request
Special material components
Start control box or automatic digital control box
Cable length
Other voltages or frequency 60Hz
Single phase motor with built-in capacitor
KATREENI PUMP MORE DETAILS
Stailess Steel Submersible Pump
Brass outlet/connection
Plastic impeller
High precision rotor
Stainess steel base
Stainless steel filter
Copper core cable
304 stainless steel material
All copper motor
High toughness oil sac
Test
Each water pump will undergo multiple tests before leaving the factory.
Electric test of high voltage .
Air tightness test .
Water tightness test .
Operation test .
Deep Well Pump Installation Notice
1.the pump must be fully submerged in water .
2.Vertical installation .
3.The pump must be installed at least 5m from the bottom of the well .
4.The max depth is 80 m .
5.The pump should be under the water when operating
OUR QUALITY
High efficiency, energy saving, large power.
Made of stainless steel material, low consumption, anti oxidation.
Stainless steel net cover, prevent debris into the pump body.
Stainless steel pump body ,never rust, long service life.
Oil immersed 100% copper wire motor,quality assurance.
Performance Data
