SP SERIES VERTICAL STAINLESS STEEL DEEP WELL PUMP 4SP 5SP 6SP SUBMERSIBLE PUMP

                SP SERIES VERTICAL STAINLESS STEEL DEEP WELL PUMP   4SP 5SP 6SP SUBMERSIBLE PUMP

The following SP series stainless steel deep well pump detailed information is provided by the registrant publisher of Zhejiang Dolay Pump Industry Co., Ltd.

Detailed description:

1. product description

The impeller is designed using a high-efficiency hydraulic model, which saves operating costs. The motor and water pump are connected vertically, requiring only a small installation space. A check valve is installed above the pump body to prevent the water pump from being impacted by water when the power is cut off. The parts of the water pump can be flexibly assembled according to different flow and head requirements. The pump body and motor are made of stainless steel, which has good corrosion resistance and will not cause secondary pollution. Because the pump body is placed in the water, the noise generated is very low. A series of stainless steel water pumps adapted to different voltages (380V/220V) and (50HZ/60HZ) are provided. 0.5-380m³/H, motor rate 185KW. Stainless steel means that the water pump is lightweight, easy to transport, and has low assembly costs, greatly saving installation and maintenance costs. All bearings are water lubricated, and the rectangular shape of the bearing channels allows the existing sand particles to be discharged at the same time as the liquid is pumped.

The inlet filter prevents particles and large particles that exceed a specified number from entering the pump body.

Main purpose

This system is suitable for circulation and pressurization of clean water and softened water;

This series is made of 304 stainless steel, which has good corrosion resistance. It is also suitable for slightly alkaline water, demineralized water, and the pump made of 316 stainless steel is suitable for highly corrosive liquids.

Conditions of Use

Thin, clean, non-corrosive liquid containing no solid particles or fibers;

Liquid temperature: +40℃;

Working pressure: 30 Pa;

pH value: 6.5~8.5;

Submersion depth does not exceed 130 meters.

Product  Parameters

Model    Motor power(KW)    Flow(m3/h)/h     lift range( m )    Applicable well diameter

4SP 3-6      0.37                   3                         26m                     1.25"

4SP 3-9      0.55                   3                         39m                     1.25"

4SP 3-12    0.75                   3                         51m                     1.25"

4SP 3-15     1.1                    3                         64m                     1.25"

4SP 3-21     1.5                    3                         90m                     1.25"