You are here: Home » News » 4Inch Stainless Steel Submersible Pump Stainless Steel Deep Well Pump Large head Pump

4Inch Stainless Steel Submersible Pump Stainless Steel Deep Well Pump Large head Pump

Publish Time: 2022-11-24     Origin: Site

Stainless Steel Submersible Pump Stainless Steel Deep Well Pump Large head Pump

Publisher Zhejiang Donglei Pump Industry Co., Ltd. Stainless steel submersible pump 

Stainless steel deep well water pump, large lift pump, 

Stainless steel submersible pump

Large lift deep well submersible pump


  • Pump Type

  • Application Data

  • Basic features

  • Special Features

  • Typical applications

  • Working Conditions


Pump Type

2-wire type : 1/3 to 1.5 hp;   

3-wire type : 1/3 to 2 hp 

Single-phase: 115, 230V - 60 Hz 220V-60Hz 

Three-phase:  220, 230, 380, 460, 575V - 60 Hz     220 , 380V-50Hz


Application Data 

This motor is a reliable motor for use in wells 4" diameter or larger. 

Continuous operation in water at 40°C. 

Direction of rotation; unidirectional, counterclockwise facing the shaft end; three-phase, electrically reversed. 

See KATREENI Electric Submersible Motors :

Applications, Installation, Maintenance Manual" for more information.


Basic Features 

Anti-corrosion all stainless steel shell 

Stainless steel spline shaft 

Airtight stator coil 

Epoxy resin self-healing system

Water lubrication filter type thrust bearing 

Pressure balance film 

Built-in lightning arrester (with single-phase 200 volts, three-phase 230 volts)

Replaceable water blocking lead 


Special Features

Bottom material and sealing method improve corrosion resistance in harsh water environment When the water temperature reaches the target 30 ℃, the 2-horsepower motor does not need a drainage catheter, and the 3-horse power motor needs 8 cm per second of cooling water flow 2-wire motor .It is a split-phase design with integrated starting elements and does not require a control box. This relay provides permanent protection during the operating of the pump.


Typical Applications 

Water supply

Irrigation system 

Lowering of ground water 

Pressurization 

Various industrial use 


Working Conditions 

Thin clean non-corrosive liquid without solid particles or fibers 

Temperature : +35°C 

Working pressure : 30 bar

PH value : 6.5~8.5

Submersion depth : no more than 100 meters 


This system is suitable for the circulation and pressurization of clean water and softened water. 

This series is made of 304 stainless steel, which has good corrosion resistance when transporting cold water containing a small amount of hydride. 

It is suitable for slightly alkaline water, demineralized water

316 stainless steel and ammonia rubber pumps are suitable for highly corrosive liquids.


4 inch deep well submersible pump technical parameters

Model  4SPM2   4SP2  4SP5

Lift(m)

Motor power (KW)   Flow rate (m3/h)   4SP2-7 0.37KW 0.5hp   Lift  25m


Contact Details

MOBILE:0086-13867672347

ADD: NO.189 HENGSHI ROAD, HENGFENG INDUSTRY AREA, WENLING, TAIZHOU, ZHEJIANG PROVINCE,CHINA.

TEL: 0086-57686932269

CONTACT US

© 2021ZHEJIANG DOLAY PUMP INDUSTRY CO. LTD. All rights reserved.Site Map. T echnology by  leadong