1.Disconnect the power supply or move it to a place without direct sunlight:
First, ensure safety by disconnecting the power supply of the water pump or moving it to a place without direct sunlight.
2. Disassemble the inlet and outlet pipes of the water pump:
Next, remove the inlet and outlet pipes of the water pump, which is the first step in cleaning.
3. Clean the filter screen:
Focus on cleaning the filter screen of the water pump. You can gently rinse with a faucet, or soak in a cleaning agent before cleaning.
Be careful not to use too much force to avoid damaging the filter screen.
4. Check and clean the pipeline: Check if there are any blockages inside the pipeline, especially at the joints.
You can rinse the pipeline with tap water to remove any blockages.
If impurities or sediment are found inside the pipeline, professional cleaning agents or ultrasonic cleaning machines should be used for thorough cleaning.
5. Reinstall and test: After cleaning, reinstall the inlet and outlet pipes and filter screen to ensure a tight connection and no leakage.
Connect the power supply and test whether the water pump has resumed normal operation.
The measures to prevent water pump blockage include:
1. Regular inspection and maintenance: Regularly inspect the inlet pipe, filter screen, and pipeline of the water pump, clean up debris and sediment in a timely manner, and prevent blockage.
2. Use appropriate filters: Install metal mesh filters or other filters to prevent sand and debris from entering the water pump.
3. Keep clean: Ensure that the inlet of the water pump is kept away from debris and sand, and installed in a clean place to avoid inaccurate inlet position causing poor water flow.
