You are here: Home » News » How To Solve Common Faults of Household Booster Pumps

How To Solve Common Faults of Household Booster Pumps

Views: 30     Author: Site Editor     Publish Time: 2024-08-13      Origin: Site

Inquire

                                                                           Common faults of household booster pumps



Common faults of booster pumps : 

1.Booster pump leakage.

Treatment method: The water pipe is leaking, and the water flow switch is controlled by the flow of water. As long as there is a certain degree of leakage, the pump will start to work.

2. The booster pump does not produce water.

Treatment method: The booster pump does not produce water because the inlet and outlet valves are not opened or the inlet and outlet pipes and the impeller of the flow channel are blocked; the blockage needs to be checked and cleared.

3. The motor of the booster pump is heated

Solution: The motor of the booster pump may be heated because the ambient temperature is too high, the motor has poor heat dissipation, or water has entered the motor; check the mechanical part and adjust it in time, and the positive outlet valve of the regulator makes the pump work near the rated flow and head.

4. The water has stopped, but the pump is running.

Reason: The water pipe is leaking. The water flow switch is controlled by the flow of water. As long as there is a certain degree of leakage, the pump will start to work.

Solution: Check the water pipe and stop the leakage.

5. The pump stops after running for a while, and runs again after a few seconds, and so on.

Solution: Just ask the maintenance worker to check the water pipe and stop the leakage.

6. If there is air in the water pipe, it is very likely to cause backflow, and the backflow will keep the pump running.

Solution: In this case, you only need to install a check valve, which can be bought at various hardware stores.

7. Regardless of whether there is water or not, as long as the small switch of the pump is turned to automatic, the pump will start.


Booster pumps are mainly used for as follows :

  • boosting water heaters, low water pressure in high-rise buildings, saunas, baths, etc., 

  • boosting the water pressure on the top floor of an apartment,

  • solar energy automatic boosting, reverse osmosis water purifier boosting, etc.


Booster pumps are commonly used equipment for boosting and water delivery in various fields, and are characterized by simple and compact structure, easy installation and maintenance, and stable and reliable performance.


content is empty!

Quick Links

Contact Details

MOBILE:0086-13867672347

ADD: NO.189 HENGSHI ROAD, HENGFENG INDUSTRY AREA, WENLING, TAIZHOU, ZHEJIANG PROVINCE,CHINA.

TEL: 0086-57686932269
CONTACT US
© 2021ZHEJIANG DOLAY PUMP INDUSTRY CO. LTD. All rights reserved.Site Map. Technology by leadong